Videx is offering lines of single or multiple die Hand Feed Cold Formers.

The machines are designed for production of small and medium size batches of Long Headed, Shouldered or Extruded parts which can be either straight or bent.  

The Videx Cold Formers are available with 1, 2 or 3 heading stations and in tonnage rating from 50 tons and up to 300 tons.  A threading station is optional on all models.

The feed of the parts is done either from the front (for straight parts) or from the side (for bent parts that need
to be collated or headed close to the bend).

The machines are designed for a very quick and simple change-over. The whole gripper die block lifts up pneumatically and die changed can be performed outside the machine. The heading tools are reachable from the side and can be changed in a couple of minutes.

The position of the blank is precise due to the retractable
positive stop and the stroke is fully adjustable by turning a big wheel at the back of the machine.

When supplied as a fully automatic machine, the machine will also straighten, cut to length and optionally thread the parts and bend them.

 

 

VRH models are available as magazine-feed or hand-feed.

 

VAS-TRH models start from coil, straighten the wire, cut to length, cold form and optionally thread.

 

 

Model & Specifications	VRH-100	VRH-150	VRH-250	VRH-350
Heading tonnage	100 tons	150 tons	250 tons	350 tons
Thread range indented hex bolts	M-8 to M-12 5/16” – 1/2”	M-8 to M-16 5/16” – 5/8	M-10 to M-20 3/8” – 3/4”	M-12 to M-24 1/2” - 1”
Upset diameter range	8-16mm 5/16” – 5/8”	8-20mm 5/16” – 3/4”	10-24mm 3/8” – 1”	12-32mm 1/2” – 1¼”
Extrusion diameter range	8-32mm 5/16” – 1¼”	8-50mm 5/16” – 2”	10-60mm 3/8” – 2¼”	12-80mm 1/2” – 3”
Extrusion stroke	60mm	80mm	120mm	180mm
Minimum length	200mm 8”	250mm 12”	300mm 12”	300mm 12”
Maximum length	3,000mm 10’	4,000mm 12’	4,000mm 12’	4,000mm 12’