videx machine engineering

Machinery for the Wire & Fastener Industries

VTM; End Turning, Boring and Chamfering machine

 

The Servo operated line of Turning machines perform multiple operations at the same time, and replace traditional automatic lathes in production of straight parts with turned ends.

The machines are equipped with 2-4 turning stations on each side, that turn, chamfer and drill bar ends to virtually any requested length and diameter.

  • The machines can be magazine fed or fully automatic from coil.
  • When working from coil, the machines will pull the wire, straighten it, cut to length and turn the edges, face, drill and chamfer.
  • Each turning station can perform up to 4 operations at the same time like facing, drilling, chamfering, turning and calibrating the diameter.
  • Each one of the stations can be designed to perform other operations as well, such as heading, flattening, marking, etc.
 

Specifications

VTM-20

VTM -25

VTM -30

VTM -35

VTM -40

Wire diameter range, 

up to 700 N/mm² (100 kpsi)

5-13mm

3/16”-1/2”

6-16mm

1/4”-5/8”

8-20mm

5/16”-3/4”

10-25mm

3/8”-1”

13-32mm

1/2”-1¼”

Minimum standard length

(shorter upon request)

100mm

120mm

160mm

200mm

250mm

Maximum length

Per request